Tunnel Dryer

///Tunnel Dryer

Tunnel Dryer

In this type of  Tunnel Drier, the car is movable and the Drier is stationary. The range of Drier temperature is between 50ºC to 150ºC for removing the moisture in the product. All type of fuels like furnace oil, HSD, LDO, kerosene, LPG, natural gas, producer gas, Bio gas can be used for firing.

Tunnel Drier is side / up draft Oven. If required Humidity is also controlled by injecting water through nozzles. This type of drier is used for continuous type production.

Air & material used in drying process can move through the dryer either in parallel or counter current way.  Also, the dryers are compartmented and cross-flow is also adopted. Intermittent blowing and continuous blowing is also done as per requirement.

This type of drier is used for continuous type production. Recirculation system is provided for better circulation and good exhaust system is provided to take the moisture content out of the drier.

Transfer car for car movement is provided at entry and exit side. The door raising is done by hydraulic system or gear motor system or pneumatic system. Car pushing system is done by hydraulic system.

This type of Drier is user-friendly and using SCADA all the temperature-time graph and all control parameters can be monitored. Using PLC, the kiln is fully automated for the easy usage of the customers.

Range of Technical Specification

Temperature          :  50 to 150°C

Capacity                 :  2  to  50 Ton/day

Length                    :  30 to 150 m

Fuel                        :  FO / HSD / LDO / KEROSENE / LPG / NATURAL GAS / PRODUCER GAS / BIO GAS

Control                    :  Auto / Semi-Auto / Manual

Product                    :  Flow Control Product, Silica, Fire Bricks, Clay Bricks, as per Customer Requirement

2018-11-30T14:08:57+00:00By |Comments Off on Tunnel Dryer